Services for the 1917 Enfield (30-06 Only)
| Item # | Description | Price |
|---|---|---|
| CS565 | Standard barrel Installation and Headspace (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. Applicable for standard barrels in 30-06. Rifle will be function fired. The take off barrel will be returned unless directed otherwise. Removal of barrel requires a relief cut in old barrel to minimize the risk of damage to receiver. | Starting at $190 |
| CS566 | Deluxe barrel installation (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) Includes everything in CS365 with the addition of precision bolt lapping, truing of front receiver face and bolt face. | Starting at $285 |
| CS301 | Rifle metal refinish-Parkerize all metal parts. This service includes the disassembly of the rifle, surface preparation and the parkerizing of the metal parts. Rifle will be reassembled. It is important to note that the exact color or tint of the finish will vary depending on the type and hardness of the steel, but it will generally be a medium gray.(Removal of pitting is not included). | $285 |
| CS305 | Stock set refinish-standard. This service includes the removal of the old finish/surface oil, sanding as necessary to remove minor surface blemishes. Special attention is given to maintaining the sharp edges and stock contours. Application of a commercial color stain and commercial tung oil matte finish sealer is included. Repairs and special needs will be quoted before performing the work. | Starting at $285 |
| CS309 | Trigger clean up, remove creep, 3.5 lb+. This service includes the removal of all noticeable creep but maintains a crisp military two stage trigger pull and a trigger weight of at least 3.5 lb. Reducing the weight of the trigger pull is not the objective of this service. | $190 |
| MISCLAB | General repair labor, per hour. | $95 |